No web account? Get one here.

Accessories and consumables for EASY-nLC 1000

Description	Part Number
A/B mixing tee & Venting Tee Nanoliter-dead-volume tee (1/16 inch OD tubing) 1 kit	SC901
Autosampler needle ASC Autosampler injection needle including all required fittings. For use with autosampler C (ASC). 1 pc.	LC302
Autosampler vials with caps 250 uL polypropylene vials with septum caps for use with EASY-nLC 300 vials and 300 caps	LC309
Column out flow line Column out flow line and fittings 1 pc.	LC560
Contact closure cable, ABI/MDS/Sciex For EASY-nLC to mass spectrometer connection 1 pc.	LC161
Contact closure cable, Bruker/Agilent For EASY-nLC to mass spectrometer connection 1 pc.	LC162
Contact closure cable, ThermoFisher For EASY-nLC to mass spectrometer connection 1 pc.	LC160
Contact closure cable, Varian For EASY-nLC to mass spectrometer connection 1 pc.	LC164
Contact closure cable, Waters/Micromass For EASY-nLC to mass spectrometer connection 1 pc.	LC163
EASY-nLC wheel table Custom-made wheeled table to fit small foot print of EASY-nLC (W50 x D40 x H90 cm) 1 pc.	LC275
Flow sensor B to mixing Tee flow line Includes fittings. This kit DOES NOT include Tee (SC901). 1 kit	LC543
Fuses 110V/5A Fuses for EASY-nLC (110V/5A) 2 pcs.	LC157
Fuses 230V/2.5A Fuses for EASY-nLC (230V/2.5A) 2 pcs.	LC158
HPLC-to-Column connector Zero-dead-volume union (1/16 inch OD tubing) 1 kit	SC900
Loop 20 µl 20µl loop including fittings 1 pc.	LC472
Loop 5 µl 5µl loop including fittings 1 pc.	LC471
Loop 50 µl 50µl loop including fittings 1 pc.	LC475
Low pressure solvent flowlines Complete set of flow lines, Tee's and check valves needed to replace the low pressure solvent delivery and waste system on one pump. 1 pc.	LC230
Press. sensor, valve flowline, A/B Flow line including fittings 1 pc.	LC513
Press. sensor, valve flowline, S Flowline including fittings 1 pc.	LC514
Pump piston seals, P-009800 - P-019999, UHPLC Pump piston seals 4 pcs.	LC510
Pump to press. sensor flowline Flow line including fittings 1 pc.	LC512
Replacement filter discs 10 μm filter discs 2pcs.	LC232
Sleeves 1/32" for 280µm OD 10 pcs.	SC903
Solvent filter kit 2 solvent filter holding capsules, 2 x 10μm filter discs, 2 BlueCap lids and fittings and flow lines to mount filter assemblies onto bottle lids 1 pc.	LC235
Solvent-side check valve Solvent-side check valve 1 pc.	LC233
Tryptic digest BSA standard A complex mixture of peptides used for making performance test for the Easy-nLC product line. It is produced by Trypsin digestion of Bovine Serum Albumin (BSA) that was reduced and alkylated with Iodoacetamide (CAM modified). This peptide mixture can be used to test a Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight (MALDI-TOF) or Electrospray Ionization (ESI) mass spectrometer (Orbitrap, TOF, Q-TOF or Ion Trap). 500 pmol	LC722
Valve blank stop Plug for blocking valve ports 1 pc.	LC523
Valve rotor (E3), for serial nos. V-010000 and above Suitable for valve serial numbers V-010000 and above 1 pc.	LC228
Valve stator, for serial nos. V-001000 – V-019999, coated For valve serial numbers V-001000 and above 1 pc.	LC226
Valve to flow sensor flowline Flow line including filter and fittings 1 pc.	LC522
Wash bottle ASC One (1) autosampler wash bottle with lid. For use with autosampler C (ASC). 1 pc.	LC304
Wash insert ASC Wash insert for autosampler wash bottle. For use with autosampler C (ASC). 1 pc.	LC303
Waste in flow line Waste in' flow line and fittings 1 kit	LC562
Waste line Waste line and fittings (from W valve to waste) 1 kit	LC563
Waste-side check valve Solvent-side check valve 1 pc.	LC234

Product descriptions and specifications are subject to change without notice.

No web account? Get one here.

Spare parts for EASY-nLC 1000

Description	Part Number
Autosampler, ASC Requires a service engineer for installation. 1 pc.	LC301
Flow sensor Requires a service engineer for installation 1 pc.	LC540
HDD Hard disk with latest software image loaded, can be installed by user 1 pc.	LC581
LCD screen LCD screen - to be installed by a service engineer 1 pc.	LC282
PC computer PC computer - to be installed by a service engineer 1 pc.	LC580
Pressure sensor Pressure sensor can be installed by user 1 pc.	LC502
Pump controller board Pump controller board - to be installed by a service engineer 1 pc.	LC574
Pump, P-009800 - P-019999, UHPLC Complete pump module for external 15 Kpsi pressure sensor. Requires service engineer for installation 1 pc.	LC501
Valve Complete valve module for E3 rotors. Requires a service engineer for installation. 1 pc.	LC519

Product descriptions and specifications are subject to change without notice.