Accessories for EASY-nLC

Please note that, with the exception of item related to the autosampler (earlier version designated ASA, new version designated ASC), all spares and accessories are suitable for EASY-nLC and EASY-nLC II systems. Check under 'maintenance/devices' menu to find out which autosampler is installed.

No web account? Get one here.

Product	Order Code
ThermoFisher contact closure cable For EASY-nLC to mass spectrometer connection 1 pc.	LC160
ABI/MDS/Sciex contact closure cable For EASY-nLC to mass spectrometer connection 1 pc.	LC161
Bruker/Agilent contact closure cable For EASY-nLC to mass spectrometer connection 1 pc.	LC162
Waters/Micromass contact closure cable For EASY-nLC to mass spectrometer connection 1 pc.	LC163
Varian contact closure cable For EASY-nLC to mass spectrometer connection 1 pc.	LC164
Loop 10µl 10µl loop including fittings 1 pc.	LC171
Loop 20 µl 20µl loop including fittings 1 pc.	LC172
Loop 50 µl 50µl loop including fittings 1 pc.	LC175
4 x 6 vial adapter, ASA Contains an adapter and 24 vials. For use with autosampler A (ASA). 1 kit	LC190
8 x 12 micro titer plate adapter, ASA Contains an adapter, 10 AbGene-0800 micro titer plates and 2 silicone mattes. For use with autosampler A (ASA). 1 kit	LC191
EASY-nLC wheeled table Custom-made wheeled table to fit small foot print of EASY-nLC (W50 x D40 x H90 cm)	LC275
Autosampler vials with caps 250 uL polypropylene vials with septum caps for use with EASY-nLC 300 vials and 300 caps	LC309
EASY-nLC driver for Xcalibur (ThermoFisher) Integration software package to enable control of EASY-nLC through Xcalibur (v 1.4 and 2.0). One (1) license, valid for one (1) Xcalibur installation.	LC400
HPLC-to-Column connector Zero-dead-volume union (1/32 inch OD tubing), 10x SC603 1 kit	SC600
A/B mixing tee & Venting Tee for two-column setup Nanoliter-dead-volume tee (1/32 inch OD tubing), 10 sleeves for 360 µm OD fused silica (10xSC603). 1 kit	SC601
Connector Kit for two-column setup Zero-dead-volume union (1/32 inch OD tubing), Nanoliter-dead-volume tee (1/32 inch OD tubing), 10x SC603 1 kit	SC602
Sleeves (2cm, 1/32 OD) for 360 µm OD fused silica 30 x sleeves (2cm, 1/32 OD) for 360 µm OD fused silica 30 pcs.	SC603/30

Proxeon is not responsible for typographical errors.

Spare parts for EASY-nLC

No web account? Get one here.

Product	Order Code
Fuses 110V/5A Fuses for EASY-nLC (110V/5A) 2 pcs.	LC157
Fuses 230V/2.5A Fuses for EASY-nLC (230V/2.5A) 2 pcs.	LC158
Waste bottles 2 pcs.	LC182
Wash insert, ASA Wash insert for autosampler wash bottle. For use with autosampler A (ASA). 1 pc.	LC184
Autosampler wash bottles, ASA Autosampler wash bottles with lids. For use with autosampler A (ASA). 6 pcs.	LC185
Solvent bottles BlueCap bottles with lids 4 pcs.	LC186
Pump piston seals Pump piston seals 4 pcs.	LC210
Pump to valve flow line Flow line including fittings 1 pc.	LC211
Pump to pressure sensor flow line Flow line including fittings 1 pc.	LC212
Pressure sensor to valve flow line Flow line including fittings 1 pc.	LC213
Valve to flow sensor flow line Flow line including filter and fittings 1 pc.	LC222
Valve blank stop. Plug for blocking valve ports 1 pc.	LC223
Valve rotor Suitable for all valve serial numbers 1 pc.	LC224
Valve stator, uncoated For valve serial numbers V-001000 and below 1 pc.	LC225
Valve stator, coated For valve serial numbers V-001000 and above 1 pc.	LC226
Low pressure solvent flow lines Complete set of flow lines, Tee's and check valves needed to replace the low pressure solvent delivery and waste system on one pump. 1 pc.	LC230
Replacement filter discs 10 μm filter discs 2pcs.	LC232
Solvent-side check valve 1 pc.	LC233
Waste-side check valve 1 pc.	LC234
Solvent filter kit 2 solvent filter holding capsules, 2 x 10μm filter discs, 2 BlueCap lids and fittings and flow lines to mount filter assemblies onto bottle lids 1 pc.	LC235
Flow lines for A/B mixing tee Complete set of flowlines for A/B mixing tee including fittings. This kit DOES NOT include Tee (SC601). 1 kit	LC243
Autosampler injection needle, ASA Autosampler injection needle including all required fittings. For use with autosampler A (ASA). 1 pc.	LC251
Column out flow line Column out flow line and fittings 1 pc.	LC260
Waste in' flow line Waste in' flow line and fittings 1 kit	LC262
Waste line Waste line and fittings (from W valve to waste) 1 kit	LC263
A complete set of flow lines, ASA All flow lines and fittings required to plumb EASY-nLC system including: pump to pressure sensor flow lines (3 x LC212), pressure sensor to valve flow lines (3 x LC213), valve to flow sensor flow lines (2 x LC222), A/B mixing tee (SC601), 20µl loop (LC172), two sets of low pressure solvent flow lines (2 x LC230), two 10μm filter discs for solvent filters (LC232), flow lines for A/B mixing tee (LC243), autosampler injection needle for ASA (LC251), column-out flowline (LC260), waste-in flowline (LC262), waste line (LC263). 1 kit	LC270
Accessory kit, ASA Accessory kit contains: set of low pressure solvent flow lines (LC230), 4 pump piston seals and a piston seal exchange tool (LC210), autosampler injection needle for ASA (LC251), valve rotor (LC224), column-out flowline (LC260), waste-in flowline (LC262), plug for blocking valve ports (LC223), HPLC-to-Column connectors (2 x SC600), micro fittings plug, 50 cm 10ID fused silica, 35 cm teflon tubing including nut and ferrule. 1 kit	LC271
Maintenance kit, coated stators, ASA Maintenance kit includes: 4 pump piston seals and a piston seal exchange tool (LC210), 2 pump to pressure sensor flow lines (2 x LC212), 2 pressure sensor to valve flow lines (2 x LC213), 2 coated stators (2 x LC226), 8 valve rotors (8 x LC224), 2 valve to flow sensor flow lines (2 x LC222), 2 solvent-side check valves (2 x LC233), 2 waste-side check valves (2 x LC234), two 10μm filter discs for solvent filters (LC232), autosampler injection needle for ASA (LC251), column-out flowline (LC260) and waste-in flowline (LC262). For systems with valve serial numbers above (or equal to) V-001000. 1 kit	LC272
Maintenance kit, uncoated stators, ASA Maintenance kit includes: 4 pump piston seals and a piston seal exchange tool (LC210), 2 pump to pressure sensor flow lines (2 x LC212), 2 pressure sensor to valve flow lines (2 x LC213), 2 uncoated stators (2 x LC273), 8 valve rotors (8 x LC224), 2 valve to flow sensor flow lines (2 x LC222), 2 solvent-side check valves (2 x LC233), 2 waste-side check valves (2 x LC234), two 10µm filter discs for solvent filters (LC232), autosampler injection needle for ASA (LC251), column-out flowline (LC260) and waste-in flowline (LC262). For systems with valve serial numbers below V-001000. 1 kit	LC273
Autosampler injection needle, ASC Autosampler injection needle including all required fittings. For use with autosampler C (ASC). 1 pc.	LC302
Wash insert, ASC Wash insert for autosampler wash bottle. For use with autosampler C (ASC). 1 pc.	LC303
Autosampler wash bottle with lid, ASC One (1) autosampler wash bottle with lid. For use with autosampler C (ASC). 1 pc.	LC304
Complete set of flow lines, ASC All flow lines and fittings required to plumb an EASY-nLC system including: 3 pump to pressure sensor flow lines (3 x LC212), 3 pressure sensor to valve flow lines (3 x LC213), 2 valve to flow sensor flow lines (2 x LC222), A/B mixing tee (SC601), a 20µl loop (LC172), 2 sets of low pressure solvent flow lines (2 x LC230), two 10µm filter discs for solvent filters (LC232), flow lines for A/B mixing tee (LC243), autosampler injection needle for ASC (LC302), column-out flowline (LC260), waste-in flowline (LC262) and waste line (LC263). 1 kit	LC305
Accessory kit, ASC Accessory kit containing: a set of low pressure solvent flow lines (LC230), 4 pump piston seals and a piston seal exchange tool (LC210), autosampler injection needle for ASC (LC302), valve rotor (LC224), column-out flowline (LC260), waste-in flowline (LC262), plug for blocking valve ports (LC223), HPLC-to-Column connectors (2 x SC600), micro fittings plug, 50 cm 10ID fused silica and 35 cm teflon tubing including nut and ferrule. 1 kit	LC306
Maintenance kit, coated stators, ASC Maintenance kit includes: 4 pump piston seals and a piston seal exchange tool (LC210), 2 pump to pressure sensor flow lines (2 x LC212), 2 pressure sensor to valve flow lines (2xLC213), 2 coated stators (2 x LC226), 8 valve rotors (8 x LC224), 2 valve to flow sensor flow lines (2 x LC222), 2 solvent-side check valves (2 x LC233), 2 waste-side check valves (2 x LC234), two 10µm filter discs for solvent filters (LC232), autosampler injection needle for ASC (LC302), column-out flowline (LC260) and waste-in flowline (LC262). For systems with valve serial numbers above (or equal to) V-001000. 1 kit	LC307
Maintenance kit, uncoated stators, ASA Maintenance kit includes: 4 pump piston seals and a piston seal exchange tool (LC210), 2 pump to pressure sensor flow lines (2 x LC212), 2 pressure sensor to valve flow lines (2 x LC213), 2 uncoated stators (2 x LC273), 8 valve rotors (8 x LC224), 2 valve to flow sensor flow lines (2 x LC222), 2 Solvent-side check valves (2 x LC233), 2 waste-side check valves (2 x LC234), two 10μm filter discs for solvent filters (LC232), autosampler injection needle for ASC (LC302), column-out flowline (LC260) and waste-in flowline (LC262). For systems with valve serial numbers below V-001000. 1 kit	LC308

Proxeon is not responsible for typographical errors.