On this page: Accessories | Spare parts

The EASY-nLC II has gone through a number of minor component revisions.This guide provides help when ordering spare parts and consumables.

The variant for each component can be determined uniquely from its serial number, which is printed on a label on the component itself, stored in the controller electronics and available through the graphical user interface (Maintenance/Devices – About tab).

(702.9 kB)

Spare parts and consumables guide

No web account? Get one here.

Accessories and consumables for EASY-nLC

Description	Part Number
4 x 6 vial adapter, ASA Contains an adapter and 24 vials. For use with autosampler A (ASA). 1 kit	LC190
8 x 12 micro titer plate adapter, ASA Contains an adapter, 10 AbGene-0800 micro titer plates and 2 silicone mattes. For use with autosampler A (ASA). 1 kit	LC191
A/B mixing tee & Venting Tee for two-column setup Nanoliter-dead-volume tee (1/32 inch OD tubing), 10 sleeves for 360 µm OD fused silica (10xSC603). 1 kit	SC601
Autosampler injection needle, ASA Autosampler injection needle including all required fittings. For use with autosampler A (ASA). 1 pc.	LC251
Autosampler needle ASC Autosampler injection needle including all required fittings. For use with autosampler C (ASC). 1 pc.	LC302
Autosampler vials with caps 250 uL polypropylene vials with septum caps for use with EASY-nLC 300 vials and 300 caps	LC309
Autosampler wash bottles, ASA Autosampler wash bottles with lids. For use with autosampler A (ASA). 6 pcs.	LC185
Column out flow line Column out flow line and fittings 1 pc.	LC260
Connector Kit for two-column setup Zero-dead-volume union (1/32 inch OD tubing), Nanoliter-dead-volume tee (1/32 inch OD tubing), 10x SC603 1 kit	SC602
Contact closure cable, ABI/MDS/Sciex For EASY-nLC to mass spectrometer connection 1 pc.	LC161
Contact closure cable, Bruker/Agilent For EASY-nLC to mass spectrometer connection 1 pc.	LC162
Contact closure cable, ThermoFisher For EASY-nLC to mass spectrometer connection 1 pc.	LC160
Contact closure cable, Varian For EASY-nLC to mass spectrometer connection 1 pc.	LC164
Contact closure cable, Waters/Micromass For EASY-nLC to mass spectrometer connection 1 pc.	LC163
EASY-Column, 10 cm, ID 75µm, 3 µm, C18-A2 L 10cm, ID 75µm, 3 µm, 120 Å, ReproSil-Pur C18-AQ 1 pcs.	SC200
EASY-Column, 10 cm, ID 75µm, 3 µm, C18-A2 L 10cm, ID 75µm, 3 µm, 120 Å, ReproSil-Pur C18-AQ 3 pcs.	SC2003
EASY-Column, 2 cm, ID 100µm, 5 µm, C18-A1 L 2cm, ID 100µm, 5 µm, 120 Å, ReproSil-Pur C18-AQ 3 pcs.	SC001
EASY-nLC wheel table Custom-made wheeled table to fit small foot print of EASY-nLC (W50 x D40 x H90 cm) 1 pc.	LC275
Flow lines for A/B mixing tee Complete set of flowlines for mixing Tee including fittings. This kit DOES NOT include Tee (SC601). 1 kit	LC243
Fuses 110V/5A Fuses for EASY-nLC (110V/5A) 2 pcs.	LC157
Fuses 230V/2.5A Fuses for EASY-nLC (230V/2.5A) 2 pcs.	LC158
HPLC-to-Column connector Zero-dead-volume union (1/32 inch OD tubing), 10x SC603 1 kit	SC600
Loop 10µl 10µl loop including fittings 1 pc.	LC171
Loop 20 µl 20µl loop including fittings 1 pc.	LC172
Loop 50 µl 50µl loop including fittings 1 pc.	LC175
Low pressure solvent flowlines Complete set of flow lines, Tee's and check valves needed to replace the low pressure solvent delivery and waste system on one pump. 1 pc.	LC230
Pressure sensor to valve, for serial nos. P-000230 - P-019999 (B) Flow line including fittings (B) 1 pc.	LC216
Pressure sensor to valve, for serial nos. P-000230 - P-019999 (A, S) Flow line including fittings 1 pc.	LC213
Pump piston seals, for serial nos. P-000100 - P-009799, HPLC Pump piston seals 4 pcs.	LC210
Pump to pressure sensor, for serial nos. P-000230 - P-019999 (A, S) Flow line including fittings (A,S) 1 pc.	LC212
Pump to pressure sensor, for serial nos. P-000230 - P-019999 (B) Flow line including fittings (B) 1 pc.	LC215
Pump to valve flow line, for serial nos. P-000100 - P-000208 Flow line including fittings 1 pc.	LC211
Replacement filter discs 10 μm filter discs 2pcs.	LC232
Sleeves (2cm, 1/32 OD) for 360 µm OD fused silica 30 x sleeves (2cm, 1/32 OD) for 360 µm OD fused silica 30 pcs.	SC603
Solvent bottles BlueCap bottles with lids 4 pcs.	LC186
Solvent filter kit 2 solvent filter holding capsules, 2 x 10μm filter discs, 2 BlueCap lids and fittings and flow lines to mount filter assemblies onto bottle lids 1 pc.	LC235
Solvent-side check valve Solvent-side check valve 1 pc.	LC233
Tryptic digest BSA standard A complex mixture of peptides used for making performance test for the Easy-nLC product line. It is produced by Trypsin digestion of Bovine Serum Albumin (BSA) that was reduced and alkylated with Iodoacetamide (CAM modified). This peptide mixture can be used to test a Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight (MALDI-TOF) or Electrospray Ionization (ESI) mass spectrometer (Orbitrap, TOF, Q-TOF or Ion Trap). 500 pmol	LC722
Valve blank stop. Plug for blocking valve ports 1 pc.	LC223
Valve rotor (E3), for serial nos. V-010000 and above Suitable for valve serial numbers V-010000 and above 1 pc.	LC228
Valve rotor (H), for serial nos. V-009999 and below Suitable for valve serial numbers V-009999 and below 1 pc.	LC224
Valve stator, for serial nos. V-000100 – V-000999, uncoated For valve serial numbers V-000999 and below 1 pc.	LC225
Valve stator, for serial nos. V-001000 – V-019999, coated For valve serial numbers V-001000 and above 1 pc.	LC226
Valve to flow sensor flow line Flow line including filter and fittings 1 pc.	LC222
Wash bottle ASC One (1) autosampler wash bottle with lid. For use with autosampler C (ASC). 1 pc.	LC304
Wash insert ASC Wash insert for autosampler wash bottle. For use with autosampler C (ASC). 1 pc.	LC303
Wash insert, ASA Wash insert for autosampler wash bottle. For use with autosampler A (ASA). 1 pc.	LC184
Waste bottles 2 pcs.	LC182
Waste in flow line Waste in flow line and fittings 1 kit	LC262
Waste line Waste line and fittings (from W valve to waste) 1 kit	LC263
Waste-side check valve Solvent-side check valve 1 pc.	LC234

Product descriptions and specifications are subject to change without notice.

No web account? Get one here.

Spare parts for EASY-nLC

Description	Part Number
Autosampler, ASC Requires a service engineer for installation. 1 pc.	LC301
Flow-A Flow-A, can be installed by user 1 pc.	LC240
Flow-B Flow-B, can be installed by user 1 pc.	LC241
HDD Hard disk with latest software image loaded, can be installed by user 1 pc.	LC281
LCD screen LCD screen - to be installed by a service engineer 1 pc.	LC282
PC computer PC computer - to be installed by a service engineer 1 pc.	LC280
Pressure sensor Pressure sensor - to be installed by a service engineer 1 pc.	LC202
Pump controller board, for serial nos. P-000230-P-009799 Pump controller board - to be installed by a service engineer 1 pc.	LC274
Pump, P-000230 - P-009799, HPLC Complete pump module for external 5 Kpsi pressure sensor. Requires a service engineer for installation. 1 pc.	LC201
Valve, P-010000 - P-019999, E3 Complete valve module for E3 rotors. Requires a service engineer for installation. 1 pc.	LC218

Product descriptions and specifications are subject to change without notice.