Nano ES ion source kits offer the simplest, fastest and most flexible route to generating ions. These easily installed kits enable you to take full advantage of the powerful off-line nano-electrospray technique, invented by Wilm and Mann, or use other low-flow ES approaches such as coupling with nanoscale LC or CE separation techniques.
-
Connect to a wide range of on-line couplings for stainless steel and fused silica emitters
-
Switch to off-line borosilicate emitters in seconds
-
Apply the spray voltage via a liquid junction, through conducting ferrules or via a clip attached to the emitter
-
Accurately determine the vertical and horizontal motion and position of the emitter
Excellent flow stability
|
|
 |
Spray of 1.2 µL of a peptide mixture for more than 80 minutes. A peptide mixture from a Lactoglobulin digest was dissolved in 5% formic acid/50% methanol and loaded into a Nano ES emitter (ES38). The average flow rate was 15 nL/min. Peptide ions were observed for more than 90 minutes.
|
-
Each Nano ES ion source kit contains everything needed to get started immediately
-
Sturdy, precise X-Y-Z manipulator accommodates several fittings
-
Sliding rails allow quick retraction of the emitter
-
Compact monitor system with integrated light source visualizes the emitter and inlet orifice while resolving the motion of the emitter in the horizontal and vertical components
-
Easy access to knobs, source heads, and other necessary controls
Login to see local pricing. 
No web account? Get one here.
|
|
|
| Product |
Order Code |
| ES010 |
| ES011 |
| ES012 |
| ES013 |
| ES020 |
| ES030 |
| ES031 |
| ES032 |
| ES033 |
| ES034 |
Proxeon is not responsible for typographical errors.
Ion source kit Sciex API 2000, 220V/110V